What aspects should be considered when selecting an industrial oxygen generator?

       Industrial Oxygen GeneratorThe principle is to use air separation technology. First, the air is compressed to a high density, then the gas-liquid separation is carried out at a certain temperature by utilizing the difference in the condensation points of each component in the air, and then rectified to obtain it. Working principle of household oxygen generator: Using molecular sieve physical adsorption and desorption technology. When the molecular sieve is pressurized inside the industrial oxygen generator, it can adsorb nitrogen in the air, and the remaining unabsorbed oxygen is collected and purified to become high-purity oxygen.

　  Industrial Oxygen GeneratorAir separation mainly consists of two adsorption towers filled with molecular sieves. Under normal temperature conditions, after filtration, compressed air, water drying and other purification treatments, it enters the adsorption tower, adsorbs nitrogen and other substances in the air in the adsorption tower onto the molecular sieve, concentrates the oxygen from the gas phase, flows out from the outlet, and is stored in the oxygen buffer tank. The molecular sieve that has finished adsorption on the other tower quickly descends, explaining the adsorbed components.

　　Industrial oxygen generators have now become necessary equipment for many enterprises. For machines, good maintenance can effectively extend their service life. In addition to maintenance, correct use is also crucial.

　　Interpretation of the operation process of the industrial oxygen generator:

　　1. Turn off all power switches, including the nitrogen inlet valve and sampling valve, and wait for the system and pipeline to be completely discharged. Adjust the oxygen analyzer to collect samples, control the pressure of the pressure reducing valve to 1.0 bar, and adjust the sample flow meter, the gas volume can be controlled around 1. If the sample gas volume is too large, start to detect the nitrogen purity.

　　2. Before the compressed air pressure reaches 0.7mpa or more, the stop valve cannot be opened. Observe the pressure change of the adsorption tank and whether the pneumatic valve is working.

　　3. When the regeneration tower pressure is 0 and uniform, the pressure of the two towers should be close to half of the pressure of the original working tower.

　　 4. Turn off the entire system and each part, and observe whether the nitrogen system is working normally when the adsorption tank pressure of the nitrogen generator reaches about 0.6MPa.

　　How to choose an industrial oxygen generator?

　　1. Look at the molecular sieve Brand

　　Molecular sieves, like the central processing unit of a computer, are important core components. Its function is to separate oxygen from other inert gases in the air. The quality of the molecular sieve directly determines the stability of the oxygen flow and oxygen concentration.

　　2. Understand the compressor

　　Ordinary equipment uses domestic compressors, the gas flow is also small, the life is short, and it directly affects the life of the entire machine. Imported compressors have a large flow rate, consistent with imported components, and good oxygen production effect.

       3. Noise

　　Noise will bring inconvenience to people's work and life, and the noise is determined by the silencer. You can see the specific noise data in the product attributes, and choose low noise with the same machine quality and Price. The solution to reduce the noise of the oxygen generator is to purchase a stable and well-runningIndustrial Oxygen Generatoras a basic prerequisite.